Digital Deadbolt Installation- How to Do It
by Justin Himes on 01/23/17
When it comes to boosting the security of your home there are a lot of things that you can do. These include keeping a security dog and adding an alarm system. But, unless you have the best deadbolt your home is not secure. This is according to most locksmiths. Country Lock and Key says that most burglars use forced entry to enter your home and steal. Since the deadbolts are not functioning well they are able to force themselves into your home.
A digital deadbolt is a type of deadbolt having a steel lock that links it to the strike plate of the door frame. Although the most common one is the single cylinder some people prefer the double cylinder that requires a key to be operated from both inside and outside.
If you are installing it into an existing hole then you will not have to examine the doorjamb. However, to confirm the striker to the jamb you should turn the handle for the bolt to protrude outside. Shut the door so that the bolt lies against the doorjamb and then mark the center of the bolt using a sharp pencil. Using a square, move this line into the inside and measure the distance from the center of the bolt to the outside of the door. You need to use a ruler to measure it and then move this measurement onto the pencil line.
Next, Use the striker plane and a sharp utility knife and mark it around the striker. You can then remove the striker and the screws and then drill a 19mm hole into the center of the area. Finally, chisel it out and make sure that the bolt strikes easily without being held. Remember, you need to use a sharp chisel instead of a blunt one.
However, if you are not sure you should not hesitate to contact locksmith bow nh company such as Country Side Lock and Key to help you with digital deadbolt installation.
